Maintenance knowledge and advantages of leak detector

I. Routine Maintenance of the Leak Detector:

It is very necessary to properly maintain your leak detector. The specific steps are as follows:

1. Probe Cleaning: Use the included protective cover to prevent dust, water vapor, and grease from blocking the probe. Before using this instrument, check that the probe and the protective cover are free of dust or grease.

2. Pull down the protective cover.

3. Clean the protective cover with an industrial towel or compressed air.

4. If the probe itself is also dirty, it can be immersed in a mild cleaning agent such as alcohol for a few seconds, and then cleaned with compressed air or an industrial towel. Solvents such as gasoline, turpentine, and mineral oil are strictly prohibited, as they can easily reduce the sensitivity of the instrument.

5. Probe Replacement: The probe will eventually fail and need to be replaced. Since the lifespan of the probe is directly related to the usage conditions and frequency, it is difficult to predict the exact replacement time. When the instrument alarms or is unstable in clean and pure air, the probe should be replaced. The specific steps for replacing the probe are as follows:

(1) Confirm that the instrument is in the off state.

(2) Unscrew the old probe counterclockwise.

(3) Screw on the spare probe provided in the packaging box clockwise.

II. Advantages of the Leak Detector

1. Multiple languages and measurement units are available, and a Chinese interface can be selected.

2. Brand new mass spectrometry technology with 180-degree ionization deflection (natural focal point) and a metal-sealed structure.

3. New electronic circuit and signal processing design.

4. High minimum detectable leak rate, and the sensitivity coverage can reach 12 ranges.

5. Fast helium evacuation and rapid response.

6. High pressure resistance at the test port, enabling the detection of large leaks.

The above is the introduction by Anhui Nuoyi Technology Co., Ltd. on how to maintain the leak detector and the advantages of the leak detector. If you want to learn more about other information of the helium mass spectrometry leak detector, you can continuously pay attention to the official website of Anhui Nuoyi Technology Co., Ltd., or call to consult for more details: 400-1677-880!